PRIDE TRUCK BODIES from Heavy Hauler Trailers

COBRA Service Cranes from Heavy Hauler Trailers

COBRA Service Cranes from Heavy Hauler Trailers
TRUCK BODIES

The "Pride Service" body reflects many years of proven rugged application. Built of 14 ga. galvanneal/satincoat used by the Automotive Industry, Pride Bodies stands up to the rigorous demands of the service industry. Galvanneal/satincoat has a proven record in the automotive and service industry to resist the dreaded "Rust," and is also available in aluminum/.125 smooth and .125 treadplate.

Standard Features:

-Automotive Grade Door Seals
-Crane Compartment Drip Tray
-Integral Rear Wheel Panels for Added Rigidity
-Four D-style Tie-down Rings in Cargo Floor
-Adjustable Galvanized Shelves

-Manual Out and Down Outriggers
-Stainless Steel Fastening Hardware
-2 part Primer / 2 part Paint System
-Full Length Drip Trough -both sides
-5 year Structural Warranty

-Gas Shock Type Door Holders
-Undercoating of Body Understructure
-Rubber Fenderette on Rear Wheel Panels
-1 year Parts and Labour Warranty

Options Available:

-Service Tool Packages
-Work bench bumpers
-60" Raised Verticals complete with Overlapping Doors
-Finish paint
-Oxy/Act. Brackets

-Hydraulic Outriggers
-Various cargo control options
-Ladder Rack
-2 or 3 section flat sliding roof
-"D" ring latches

CAPTIVATOR MODEL	I	CAPTIVATOR MODEL	II
	Crane Tower: 10 - 20k ft/lbs Matrl: 12 & 14 Ga. St-Coat Body Length: 108" - 60 CA Body Height: 48" Compt. Depth: 21" Handles & Hinges: Stn. Steel Rear bumper: Tubular Type Floor: 3/16" Steel Chk. Pl. Light Kit: CMVSS/FMVSS Comp. Paint:PGG - 1 Year Warranty Chassis Req: 15,000 LB GVWR MORE INFO - CHECK STOCK		Crane Tower: up to 40k ft/lbs Matrl: 12 & 14 Ga. St-Coat Body Length: 134" - 84 CA Body Height: 48" Compt. Depth: 21" Handles & Hinges: Stn. Steel Rear bumper: Tubular Type Floor: 3/16" Steel Chk. Pl. Light Kit: CMVSS/FMVSS Comp. Paint:PGG - 1 Year Warranty Chassis Req: 19,000 LB GVWR MORE INFO - CHECK STOCK
CAPTIVATOR MODEL	III
	Crane Tower: 40k - 70k ft/lbs Matrl: 12 & 14 Ga. St-Coat Body Length: 156" - 108 CA Body Height: 60" Compt. Depth: 22" Handles & Hinges: Stn. Steel Rear bumper: Tubular Type Floor: 3/16" Steel Chk. Pl. Light Kit: CMVSS/FMVSS Comp. Paint:PGG - 1 Year Warranty Chassis Req: 27,500 LB GVWR MORE INFO - CHECK STOCK

Share |